Global's Product Categories
The Platinum Standard Period
If you’re placing a PO, place it with Global Procurement & Supply, Inc. We deliver critical, urgent, and hard-to-find materials on time and in full—with documentation to match.
Purchasing, Procurement, Facility, Maintenance, and Warehouse Managers choose us for one reason: Accountability. We verify stock, confirm alternates, and secure lanes before your schedule slips. Live tracking, milestone alerts, and chain-of-custody at every handoff keep you informed without chasing status. When exceptions occur, we reroute within minutes and brief you with options, costs, and ETAs. Pricing is competitive and defensible, and our service is accountable—end to end.
Chemicals
Chemicals — Industrial, Process, and Ag
Commodity and specialty chemistries for plant and field: solvents, acids/caustics, water-treatment, glycol/heat-transfer, resins/additives—plus ag inputs including fertilizers (UAN, UREA, MAP/DAP, NPK blends), micronutrients (Zn, B, Mn), crop protection (herbicides/fungicides/insecticides), adjuvants/surfactants, and seed-treatment packages. Supplied in pails, drums, IBCs, bulk tankers, or rail with COA/TDS, SDS, and full lot traceability.
Compliance & Handling—Baked In
REACH/TSCA/EPA/FIFRA aligned; GHS labeling; DOT/IMDG/IATA hazmat; UN-rated packaging; temperature-controlled and corrosive-service lanes where required. Secondary containment, spill kits, and closed-loop tote programs set up on site to keep EHS and QA audits clean.
Supply That Protects Uptime
VMI and route replenishment, emergency drops, and tank telemetry for level / temperature. Blend and dilution control, dosing pumps, and hose/transfer kits spec’d to material. For lubricants and coolants: ISO 4406 particle counts, oil analysis, and filtration/polish carts to extend intervals and safeguard equipment—industrial or agricultural, on schedule and to spec.
Electrical
Power to Panel — Built for Uptime
MV/LV switchgear, MCCs, and transformers (dry-type & oil-filled) through wire, lighting, and controls—spec’d to IEC/IEEE/UL and built for continuous duty.
Cable, conduit, tray, and terminations (THHN/XLPE, glands, lugs, grounding) plus panelboards, feeders, and raceway—engineered to code, from substation to the last lug.
Control & Power Quality, Covered
Breakers, contactors, soft starters, VFDs, PLCs, HMIs, and SCADA for closed-loop control that drops right into your automation stack.
UPS, surge protection, and harmonics mitigation to keep lines stable and equipment protected shift after shift.
Supply That Doesn’t Slip Schedules
Global sourcing with realistic lead times, stocked critical spares, and staged BOP kits—so outages, turnarounds, and new builds stay on schedule.
We keep energy, manufacturing, and infrastructure projects online—on time and to code.
Fire & Rescue (Our Heroes)
When the Bell Rings, This Gear Works
Turnout ensembles that take the heat: NFPA-compliant coats/pants with PBI / Kevlar blends, boots, hoods, and gloves engineered for flash, abrasion, and water. SCBA with integrated PASS and heads-up display, spare bottles, RIT packs. Thermal imagers that cut smoke, helmet lights that punch through steam, and radios with rugged PTT—so crews coordinate cleanly under pressure.
From Engine to Extrication
Attack and supply hose (LDH / EPDM / Nitrile), Storz/NST couplings, gated wyes, and high-flow nozzles; pumps, primers, CAFS, and Class A/B foam to knock the seat fast. Spreaders, cutters, rams, struts, and glass tools for vehicle rescue; saws, irons, and ventilation fans for structure work. Ladders, salvage covers, vacs, and overhaul tools to wrap the scene without a second roll.
Rescue, Medical, Wildland & HazMat
BLS / ALS kits, monitors/defibs, suction, backboards, stair chairs, and MCI caches. Wildland PPE (Nomex, goggles, shelters), hand tools, drip torches, and portable pumps for the line. Decon showers, absorbents, PID/multi-gas meters, spill control, and HazMat suits—plus accountability boards, rehab supplies, and scene lighting. Contract-ready sourcing, realistic lead times, and warranty support—gear that performs when seconds matter.
Heavy Equipment
Built to Move Earth
Excavators, loaders, dozers, graders, artics & rigids—plus buckets, blades, rippers, rakes, couplers, hammer kits. For quarry/mining we pair production loaders and pit haul with extreme-duty G.E.T., liners, and lip systems; for paving we bring pavers, screeds, MTVs, cold planers, compactors, and 2D/3D grade control to hold IRI and density; for land clearing & forestry, high-flow CTLs/skids/excavators with mulchers, shears, grapples, and full guarding; for concrete & civil, mixers, pumps, vibrators, screeds, trowels, saws—forms, shoring, and rigging to keep pours on sequence.
Keep the Fleet Tight—Power, Control, Safety
Powertrain and fluids spec’d for long pulls: engines, turbos, injectors, aftertreatment, transmissions, finals, diffs—fed by OEM-approved oils, filtration, and PM kits. Hauling & support stay ready with artics/rigids, water/fuel/service trucks, and lowboys—plus brake packs, hubs, suspensions, payload systems, bead protectors, and TPMS. Controls & guidance cut rework: 2D/3D GNSS, payload, slope/comp, telematics, harnesses, sensors, ECUs, and displays that drop clean into mixed fleets.
Where Money Meets Ground—Uptime, No Excuses
Track groups, rollers, idlers, segments; edges, end-bits, shanks, scarifiers, carbide bits—hard-face and chromium-carbide for shot-rock and abrasion. PM kitting, reseal sets, cylinder exchange, hose-while-you-wait, and reman engines/pumps/drivetrains keep iron earning. Global lanes, realistic ETAs, and staged drops mean crews stay in the cut—not waiting on parts. Right gear. On time. In full.
Industrial
Bench to Boiler. End-to-End Supply.
Hand tools, hoists, cutting fluids, weld consumables, adhesives, sealants, gaskets—we stock the bin.
Add the backbone: fasteners, rigging, ladders; bearings, gearboxes, chains; valves, actuators, gauges—plus PPE to keep the crew compliant.
Process & Powertrain, Covered.
Pumps, compressors, blowers; hydraulics and pneumatics; motors, starters, drives; PLCs, sensors, panel components — OEM-backed, spec’d to code, ready to install. Built to lift OEE and crush downtime.
Institutional
Institutional — Built for Budgets, Audits, and Uptime
K-12, higher ed, municipal, state/federal, transit, corrections—we outfit the whole campus and complex. MRO and jan/san (floor care, disinfectants, liners), grounds and snow, safety/PPE, HVAC filters and belts, lighting/controls, electrical/plumbing, tools, and hardware—plus furnishings, seating, casework, lockers, bleachers, whiteboards, AV, and café/commons fixtures. One line item or a full bill of materials, we keep facilities running without surprise gaps.
Hospitality Jan/San — Lobby to Penthouse, BOH to Pool Deck
Housekeeping carts, microfiber systems, HEPA vacs, autoscrubbers/burnishers; pH-neutral floor care for stone/LVT, grout-safe restroom cleaners, EPA List N disinfectants, electrostatic sprayers for fast turns. Linen-safe spotters, long-hold odor control, drain maintenance, slip-resistant finishes. BOH covered—HACCP degreasers, warewash, sanitizer test kits; pool/spa chem with logs; waste/recycling and compactors. Closed-loop dilution, multilingual training, SDS/GHS compliance, off-peak deliveries—rooms flip faster, public areas stay five-star, audits sail through.
Law Enforcement (Our Heroes)
Mission-Ready for the Ones Who Run Toward It
From patrol to SWAT, we kit the line with what matters: NIJ-rated armor (IIIA/III/IV), plate carriers, helmets, gloves; MOLLE duty belts with Level-2/3 retention holsters; hard-use uniforms and boots built for grind and weather. Less-lethal launchers, shields, breaching tools, and lighting that punches through smoke and rain. Comms that don’t quit—rugged radios with secure PTT, AES-level encryption, and full headset integration—so teams move as one.
Scene to Lab—Lock the Evidence Down
Crime-scene kits that cover the whole lane: barriers and PPE, tamper-evident bags, swabs, and chain-of-custody forms; latent print powders, lifters, and cards; ALS flashlights, luminol, and trace collection tools. Clean packaging, clear labeling, organized trays—everything to preserve, process, and move evidence without a miss. Rugged tablets, barcode scanners, and body-worn camera docks keep documentation fast, accurate, and admissible.
Capital Gear & Support That Stands Up
We equip fleets and facilities with the big iron: interview room systems, armory storage, lockers, range gear, drone/UAS kits, ballistic panels, mobile command posts, and generators with ATS for blackout resilience. Vehicle upfit components—lightbars, sirens, push bumpers, racks, power management—spec’d for duty cycles and installed to code. Contract-ready sourcing, realistic lead times, and warranty support—so your heroes have the tools, the uptime, and the backup they deserve.
Material Handling
Move the Payload, Beat the Clock
LP / diesel / Li-ion lifts, VNA/order pickers, AMRs/AGVs; roller/belt/accumulation conveyors with smart merges/diverts; dock levelers, seals, restraints; selective / push-back /drive-in / cantilever racking; bridge cranes, chain/lever hoists, certified rigging. We size load charts and turning radii, tie into WMS/pick-to-light/telemetry, and harden aisles with guardrail, bollards, and fall-pro—so pallets move cleaner, picks per hour climb, and stoppages drop.
Lift. Flow. Finish On Time
From forklifts and fast chargers to pallet flow, mezzanines, and pick-modules—we optimize every link. True-fit racks for your SKU mix, below-the-hook gear matched to the lift plan, conveyors that actually accumulate, docks that seal, and AMRs that shave touches. We deliver the kit, the spec, and the integration so freight turns faster, crews stay compliant, and deadlines hold.
Medical
Surgical & Acute Care
Sterile packs built to spec: instruments (German steel and single-use), trays/sets, drapes/gowns, sutures, staplers, hemostats, anesthesia circuits/filters, suction, and electrosurgical disposables. OR capital and accessories—lights, tables, booms, warmers—plus monitors, infusion pumps, and EMS/ED resupply. FDA/CE/ISO 13485 aligned with UDI, COA/LOT traceability, and shelf-life control.
Laboratory & Diagnostics
Core lab to specialty: analyzers and reagents (chemistry, hematology, coag, immunoassay), POC platforms, and molecular kits (extraction, PCR/qPCR, ELISA). Consumables and collection—vacutainers, swabs/transport media, cryovials, pipettes/tips (RNase/DNase-free), slides/covers, histology/cyto supplies, culture media. Equipment and safety—centrifuges, -80 °C freezers, refrigerators, incubators, biosafety cabinets, fume hoods, microscopes, autoclaves—plus calibration, IQ/OQ/PQ, and proficiency testing. CLIA/CAP/IVD documentation, SDS, and cold-chain with data-logged shipments keep audits clean.
Long-Term Care & Nursing Homes
Facility-grade beds and low beds, therapeutic mattresses, lifts/slings, fall-prevention, incontinent care (briefs, underpads, barrier creams), nutrition/enteral, med carts, pill-packaging, and skin-integrity programs. Routine par levels with VMI, back-order substitution logic, and staff training kits—steady supply that keeps care plans on schedule.
EVS, Washroom & Infection Control
Healthcare jan/san: EPA-listed disinfectants, sporicidals, microfiber systems, autoscrubbers, and regulated waste streams (red bag, pharma, sharps). Washroom—touch-free dispensers, soaps/sanitizers, paper, feminine hygiene, odor control, ADA-compliant fixtures. PPE across tiers (ASTM masks, isolation gowns, eyewear, gloves) with recall management where required—clean rooms, clean hands, clean audits.
Oil & Gas
Capital Iron, Field-Hard Solutions
Upstream & Offshore — From Spud to Rig-Down
Jack-ups, semis, drillships, and land rigs—top drives, drawworks, catwalks, BOP stacks/RAMs/annulars, choke/kill manifolds, mud pumps, solids control, shale shakers, degassers, and HPHT well-control packages. Subsea trees, risers, umbilicals, LMRP, running tools, heave-comp, and motion-rated handling. API 6A/16A/16C gear, ABS/DNV classed, sour-service trim where the H S bites.
Snubbing & Well Intervention — Get the Well Back Earning
Complete snubbing spreads (light/heavy), hydraulic workover, coiled tubing, wireline/slickline, pressure-control iron, lubricators, quick unions, BOPs, stripper heads, and accumulators. Hot-tap/under-pressure fittings, capillary systems, and kill lines—built for ugly wells and stuck pipe. We stage iron by footage and pressure rating, rig-ready with elbows, crosses, pups, and hammer unions you can trust.
Frac & Flowback — Pump It, Prove It
Frac pumps, blenders, hydration units, sand kings, data vans, and missile manifolds; zipper manifolds and check valves that don’t blink at proppant. Flowback separators, flare stacks, line heaters, sand traps, and choke skids—instrumented and skid-mounted for fast pad moves. Iron in 1502, 1002, and sour trim; elastomers that don’t roll over when the temp swings.
Midstream — Pipe, Pump, Prove the Meter
Gathering and trunkline: API 5L pipe, bends, induction bends, pig launchers/receivers, scraper traps, isolation valves, MOVs/actuators, and cathodic protection (rectifiers, anodes, coupons). LACT units, turbine/ultrasonic meters, provers, strainers, and over-pressure protection. Compression: Ariel/GE frames, coolers, scrubbers, pulsation bottles, and panel upgrades.
Downstream & Refining — Turnarounds Without Surprises
Reactors, reformers, furnaces, columns, trays/packing, exchangers (shell & tube, air-coolers), API 610 pumps, 617/618/619 compressors, steam traps, PSV/PRV banks, and high-alloy valves (C-276, 2205/2507). NACE MR0175/ISO 15156 for sour service, API 660/661 exchangers, API 600/602/608/609 valves. TAR kits staged by unit—crude, coker, FCC, hydrocracker, reformer—so scaff comes down on schedule.
Custom Fabrication — When the OEM Stopped Making It
Reverse-engineer the orphan part and keep the unit alive. 3D scan, model, and fab: spools, skids, choke bodies, stems/bonnets, gearboxes, tray decks, nozzle inserts, heater coils, and structural. ASME VIII-1 vessels, IX/WPS/PQR procedures, PWHT, PMI, UT/MT/PT, hydrostatic/helium tests, MTRs and full MDR. If it ran in ’98, we’ll build the twin—cheaper than ripping the whole line out.
Spares & Obsolescence — Keep Legacy Iron in the Fight
OEM and form/fit/function replacements: seals, bearings, gear sets, pump internals, valve trim, actuator kits, PLC/HMI cards, flame scanners, transmitters, and shutdown logic. Kitted by tag number and equipment list, with swap-ready gaskets/fasteners and torque specs to keep maintenance tight.
Power, Electrical & Controls — Hazardous Area, No Drama
MCCs, switchgear, transformers, UPS, lighting (Class I, Div 1/2), EX-proof enclosures, cable tray, glands, and heat-trace. VFDs, soft starters, PLC/SCADA, SIS/SIL instrumentation, fire & gas (open-path, IR, catalytic), detectors, and ESD valves. IEC/ATEX/IECEx, API RP 500/505 layouts—built to start, run, and shut down clean.
Safety & Survival — Because the Sea Doesn’t Care
FR/arc gear, H S packs, escape sets, marine/firefighting, liferafts, immersion suits, descent devices, lifelines, gas detection, eyewash/showers, and confined-space kits. Rig med/trauma caches, stretchers, and AEDs. We ship compliance with the crate—certs, dates, and labels lined up.
Documentation & QA — Paperwork that Passes the Audit
ITP, FAT/SAT, MDR with drawings, datasheets, MTRs, I/O lists, loop folders, weld logs, NDE packs, coatings reports, and preservation procedures. API/ASME/NACE stamps where they belong. You won’t chase a single cert.
Logistics That Understands Water & Border
EXW to DDP, rig-side or quayside, IOR/EOR handled, hazmat packed, seaworthy crating, humidity control, and shock-loggers. Night drops for TARs, hot-shot to the yard, and consolidation that hits sailing windows. Real ETAs, not bedtime stories.
Terms That Fit the Field
30/60/90 split available for qualified buys —snubbing spreads, rig upgrades, refinery turnarounds, and big spare lists. No junk fees. Line-item clarity. Milestone-matched if the job needs it.
Ready to keep your well, rig, or unit earning?
Bring us the tag list or the problem child. We’ll quote options (OEM, alternate, or fab), lock the spec, and hit the date. Right gear. On time. In full. No excuses.
Power
From Off-Map to On-Grid—Up, Fast, and Stable
Prime and standby gensets (diesel / gas, Tier 4 Final), containerized power, paralleling switchgear, ATS/MTS, and UPS—plus MV/LV transformers, distribution, and load banks to prove the curve. We kit cabling (cam-lock, tray, XLPE), grounding, and protection so your microgrid, plant, or temp yard comes online clean and to code (NEC/IEC, NFPA 110). From black-start to peak-shave, we deliver power that lights up, stays up, and rides through the hit.
Power
Gear Up Clip In Go Home
Hard hats (Class E), Z87+ eye/face, FR/arc-rated apparel, cut/impact gloves, and ASTM F2413 boots—plus full fall-pro: harnesses, SRLs, anchors, guardrails, and rescue kits. Lockout/Tagout stations, gas monitors, confined-space gear, AEDs / first aid, eyewash/showers (ANSI Z358.1), spill kits, and photoluminescent signage that actually gets seen. We build safety programs that pass audits—OSHA/ANSI/EN aligned—with JSA templates, near-miss reporting, SDS/GHS housekeeping, and site delivery that keeps crews clipped in, compliant, and going home in one piece.